Logo Caen

A3009

12 Channel 8 V / 9 A / 45 W Power Supply Board

Features

  • EASY Subsystem Power Supply Module
  • Magnetic field and radiation tolerant
  • 12 floating 1.5 ÷ 8 V / 9 A channels
  • 45 W maximum output power per channel
  • VMax and IMax set by trimmer for each channel
  • On/Off for each channel
  • Channels individually controlled and protected
  • Voltage Drop compensation via sense wires
  • Interlock capability
  • 48 V Service local and remote on/off

Overview

The CAEN Mod. A3009 12 Channel 8 V / 9 A Power Supply Board is developed for operation in magnetic field and moderate radioactive environment. One A3009 houses 12 floating (reversible polarity) 8 V / 9 A / 45 W maximum output power channel. The connector output voltage range is 1.5 ÷ 8 V with 5 mV monitor resolution; channel control includes various alarms and protections.

blank APP30 connector

APP30 1317G4 type connector for Mod.A3009, A3009R

Consult our connectors reference page for technical information.

The board is provided with Remote Sensing Lines to compensate for the voltage drop over the connection cables.

Safety features allows the module to perform as a current generator and includes:

Channels
can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 3% of voltage full scale range.
Overcurrent detection When a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
Hardware VMAX and IMAX
Maximum output voltage and maximum current value can be fixed via software with 5 mV resolution and the output voltage can not be programmed beyond this value.

Technical Specifications

No. of Channels

12

Polarity

Floating

Output Voltage

1.5 ÷ 8 V (connector output)

The board works properly with a Vset larger than 1.25 V and a current on the load larger than 10 A

Max. Output Current

9 A

Voltage Set/Monitor Resolution

5 mV

Current Set/Monitor Resolution

10 mA

VMAX hardware

1.5 ÷ 8 V

VMAX Hardware Accuracy

± 2% of FSR

VMAX software

1.5 ÷ 8 V

VMAX software resolution

5 m V

Voltage Ripple

< 20 mV pp on 10 µF //0.1 µF 10Hz-15 MHz

From 10 Hz to 15 MHz at full load; measured with the line terminated on a 10 μF capacitance and a 100 nF ceramic capacitance in parallel to the load

Voltage Monitor vs. Output Voltage Accuracy

max. ±30 mV ±0.3% of reading

Voltage Set vs. Output Voltage Accuracy

max. ±30 mV ±0.3% of reading

Current Monitor vs. Output Current Accuracy

± 0.05A ± 2% of reading

From 10% to 90% of Full Scale Range

Current Set vs. Output Current Accuracy

± 0.05A ± 2% of reading

Load Regulation
  • ± 0.3 % (with sense wires)
  • ± 2 % (without sense wires)

From 10% to 90% of Full Scale Range

Output Power (per Channel)

45 W

Test Set Up
  • Cable: length = 20~30 m; diam.= 10 mm (for both output and return) with sense wires connected
  • Test load: 250÷2000 W (nominal)
  • Load capacitance: 100 µF electrolytic // 100 nF ceramic (// to the load)
Weight

5.5 kg

Compare

Compare with EASY3000 LV Floating Power Supply Boards.

Loading...

Ordering Options

Code Description
WE3009XAAAAA A3009 - EASY3000 L.V. channels 8 V/9 A/45 Wfloating - APP Conn. (12 ch)  
WE3009RXAAAA A3009R - EASY3000 L.V. channels 8 V/9 A/45 W floating - Ramp Up control - APP Conn. (12 ch)  

Contacts

Great to have you back!