A3100
1 Channel 8 V / 100 A / 600 W Power Supply Board
Features
- EASY Subsystem Power Supply Module
- Magnetic field and radiation tolerant
- One floating 2 ÷ 8 V /100 A channel
- 600 W maximum output power
- VMax and IMax set by trimmer for each channel
- On/Off for each channel
- Channels individually controlled and protected
- Line Drop Regulation on board panel
- Interlock capability
- 48 V Service local and remote on/off
Overview
The CAEN Mod.A3100 is a 8 V / 100 a Power Supply Board, developed for operation in magnetic field and moderate radioactive environment. One A3100 houses one floating (reversible polarity) 8 V / 100 A (600 W maximum output power) channel.
Two versions are available: Mod. A3100, provided with APP PC5933T output connectors, and Mod. A3100B, provided with screw locks for connecting the output cables.
The connector output voltage range is 1.5 ÷ 8 V with 5 mV monitor resolution; channel control includes various alarms and protections.
The board is provided with Remote Sensing Lines to compensate for the voltage drop over the connection cables.
![]() |
APP PC5933T connector
APP PC5933T connector for Mod.A3100 |
Consult our connectors reference page for technical information.
Safety features allows the module to perform as a current generator and includes:
Channels | can be enabled or disabled through the Global Interlock logic. |
Overvoltage and Undervoltage warning | when the output voltage differs from the programmed value by more than 3% of voltage full scale range. |
Overcurrent detection | When a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator. |
Hardware VMAX and IMAX | Maximum output voltage and maximum current value can be fixed via software with 5 mV resolution and the output voltage can not be programmed beyond this value. |
Technical Specifications
- No. of Channels
1
- Polarity
Reversible
- Output Voltage
2 ÷ 8 V (connector output)
- Max. Output Current
100 A
- Voltage Set/Monitor Resolution
10 mV
- Current Set/Monitor Resolution
100 mA
- VMAX software
2 ÷ 8 V
- VMAX software resolution
5 mV
- Voltage Ripple
< 10 mV pp (@ full load)
- Voltage Monitor vs. Output Voltage Accuracy
max. ±50 mV ±0.3% of reading
- Voltage Set vs. Output Voltage Accuracy
max. ±50 mV ±0.3% of reading
- Current Monitor vs. Output Current Accuracy
± 1A ± 2% of reading
- Current Set vs. Output Current Accuracy
± 1A ± 2% of reading
- Test set up
cable: length = 30 m; diam.= 8 mm (for both output and return) with sense wires connected
test load: >600 W
load capacitance: 10 µF electrolytic // 100 nF ceramic (// to the load)
- Load Regulation
± 0.3 % (with sense wires)
± 2 % (without sense wires)
- Output Power
600 W
- Weight
6 kg
Compare
Compare with EASY3000 LV Floating Power Supply Boards.
Loading...
Ordering Options
Code | Description |
---|---|
WE3100XAAAAA | A3100 - EASY3000 L.V. channels 8 V/100 A/600 W floating - APP Conn. (1 ch) |