32 Channel 3.2 kV / 0.5 mA / 1.1 W Board
- EASY Subsystem Power Supply Module
- Magnetic field and radiation tolerant
- 32 3.2 kV / 0.5 mA channels
- Common Floating Return
- VMax and IMax set by trimmer
- Channel protections: overvoltage, overcurrent, overtemperature
- On/Off for each channel
- Interlock capability
- Local and remote 48V Service on/off
The CAEN A3535 3.2 kV / 0.5 mA / 1.1 W Power Supply Board is developed for operation in magnetic field and radioactive environment. One A3535 houses 32 3.2 kV / 0.5 mA channels with common floating return.
The output voltage can be set with 500 mV monitor resolution.
If the output voltage differs from the programmed value by more than 3% of voltage full scale range, the channel is signalled to be either in OVERVOLTAGE or UNDERVOLTAGE condition. Moreover, for each channel, a voltage protection limit SVMAX can be fixed via software with 500 mV resolution and the output voltage can not be programmed beyond this value.
The output current is monitored with 100 nA resolution; if a channel tries to draw a current larger than its programmed limit it is signalled to be in OVERCURRENT condition; the SY 1527 system detects this state as a fault and reacts according to the setting of the TRIP parameter , namely:
TRIP=infinite ( = 1000 s)
The output current is permitted to exceed the programmed limit; if the maximum output current value is reached the channel behaves like a constant current generator.
TRIP=finite (< 1000 s)
The output current is permitted to exceed the limit only for programmed time interval and then is switched off.
The TRIP time (i.e. the maximum time an OVERCURRENT condition is allowed to last) can be programmed in 0.1 s steps.
The maximum output voltage (VMAX Hardware) can be fixed, through a potentiometer located on the front panel, at the same common value for all the board channels and this value can be read out via software.
Positive / Negative depending on purchased version; common floating return
- Output Voltage
0 ÷ 3.2 kV (connector output)
- Maximum Output Power
1.1 W per channel
- Max. Output Current
- Voltage Set/Monitor Resolution
- Current Set/Monitor Resolution
- VMAX hardware
0 ÷ 3.2 kV
- VMAX hardware accuracy
± 2% of FSR
- VMAX software
0 ÷ 3.5 kV
- VMAX software resolution
- Voltage Ripple
< 50 mV pp From 10 Hz to 15 MHz at full load
- Voltage Monitor vs. Output Voltage Accuracy
± 0.3% of reading ± 1 V
- Voltage Set vs. Output Voltage Accuracy
± 0.3% of setting ± 1 V
- Current Monitor vs. Output Current Accuracy
± 2% of reading ± 0.3 µA
- Current Set vs. Output Current Accuracy
± 2% of setting ± 1 µA
Compare with EASY3000 HV Power Supply Boards.
|WE3535XAAAAA||A3535N - EASY3000 H.V. channels -3.2 KV 0.5 mAcommon floating (32 ch)|
|WE3535XPAAAA||A3535P - EASY3000 H.V. channels +3.2 KV 0.5 mAcommon floating (32 ch)|