A1539
12/24/32 Channel 100 V/10 mA Common Floating Return Boards
Features
- 12/24/32 independently controllable High Voltage channels
- 100 V / 10 mA output range
- Available with either positive, negative or mixed polarity (only with SHV connectors)
- DB25 Multipin or SHV coaxial connectors
- Common floating return shared by all channels
- Low ripple
- Under/over-voltage alert, overcurrent and max. voltage protection
- Interlock logic for unit enable
- Software Tool for easy channel management
Overview
The power supplies of the A1539 family house 32, 24 or 12 independent high voltage channels. The A1539 is available in different versions equipped with SHV or with DB25 connector:
|
DB25 connector
Single width (5 TE wide), 24 channels for Mod. A1539LN |
|
SHV connector
Single width (5 TE wide), 12 channels for Mod. A1539DN, A1539DP, A1539SM |
Consult our connectors reference page for technical information.
The channels share a Common Floating Return, which allows on-detector grounding, reducing the noise level. The output voltage range is 0 ÷100 V, (10 mV step) with 1 mV monitor resolution. The maximum output current is 10 mA, (200 nA step) with 10 nA monitor resolution.
The board is available with either positive or negative output polarity. Mixed version with 6/12 positive and 6/12 negative channels are also available (only with SHV connectors).
The HV RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the 1 ÷ 50 V/s range (1 V/s step).
Safety features allows the module to perform as a current generator and includes:
| Channels | can be enabled or disabled through the Global Interlock logic. |
| Overvoltage and Undervoltage warning | when the output voltage differs from the programmed value. |
| Overcurrent detection | When a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator. |
| Hardware VMAX | Maximum output voltage can be set, via front panel potentiometer, at the same common value for all the board channels. VMAX value can be read out via software. |
| Safety Board Interlock | This protection allows to disable the primary HV generation when the HV outputs are not connected to their loads. |
Technical Specifications
- No. of Channels
12 / 24 / 32 (Common Floating Return)
- Output Voltage
0÷100 V
- Polarity
Positive / Negative / Mixed depending on purchased version
- Max. Output Current
10 mA
- Voltage Set Resolution
10 mV
- Voltage Monitor Resolution
1 mV
- Current Set Resolution
200 nA
- Current Monitor Resolution
10 nA
- VMAX hardware
0÷100 V common for all the board channels
- VMAX hardware accuracy
1 V
- VMAX software
0÷100 V settable for each channel
- VMAX software resolution
1 V
- Ramp Up/Down
1÷50 Volt/sec, 1 Volt/sec step
- Voltage Ripple
< 5 mVpp (Max)
< 3 mVpp (Typ)
- Vmon vs. Vout accuracy
±0.02 % ±50 mV
- Vset Vs. Vout accuracy
±0.02 % ±50 mV
- Imon vs. Iout accuracy
±2 % ±10 µA
- Iset vs. Iout accuracy
±2 % 10 µA
- Maximum output power
1 W per channel
- Power consumption
A1539: 64 W @ full power
A1539L, A1539S: 48 W @ full power
A1539D: 24 W @ full power
Compare
Compare with High Voltage Power Supply.
Loading...
Accessories
- HV Cables
- High Voltage Cable Assemblies
Ordering Options
| Code | Description |
|---|---|
| WA1539DXAAAA | A1539DN - SYx527 H.V. channel -100 V 10 mA - SHV Conn. common floating (12 ch) RoHS |
| WA1539DXMAAA | A1539DM - SYx527 H.V. channel (6ch +100V 10mA, 6ch -100V 10mA) - SHV Conn. common floating RoHS |
| WA1539DXPAAA | A1539DP - SYx527 H.V. channel +100 V 10 mA - SHV Conn. common floating (12 ch) RoHS |
| WA1539LXAAAA | A1539LN - SYx527 H.V. channel -100 V 10 mA - Multipin Conn. common floating (24 ch) RoHS |
| WA1539LXPAAA | A1539LP - SYx527 H.V. channel +100 V 10 mA - Multipin Conn. common floating (24 ch) RoHS |
| WA1539SXAAAA | A1539SN - SYx527 H.V. channel -100 V 10 mA - SHV Conn. common floating (24 ch 10TE wide) RoHS |
| WA1539SXMAAA | A1539SM - SYx527 H.V. channel (12ch +100V 10mA, 12ch -100V 10mA) - SHV Conn. common floating (10TE) RoHS |
| WA1539SXPAAA | A1539SP - SYx527 H.V. channel +100 V 10 mA - SHV Conn. common floating (24 ch 10TE wide) RoHS |
| WA1539XAAAAA | A1539N - SYx527 H.V. channel -100 V 10 mA - Multipin Conn. common floating (32 ch) RoHS |
| WA1539XPAAAA | A1539P - SYx527 H.V. channel +100 V 10 mA - Multipin Conn. common floating (32 ch) RoHS |