3 Years Warranty
A7460
New
12 Channel 6 kV, 1 mA/100 µA (6W) Common Floating Return Dual Range Board
Features
- 12 independently controllable High Voltage channels
- 6 kV output voltage
- Dual range current:
- High Power: 1 mA (2 nA Current monitor resolution)
- High resolution: 100 µA (200 pA Current monitor resolution)
- Available with either positive or negative polarity
- SHV coaxial connectors
- Common floating return shared by all channels
- Low ripple
- Under/over-voltage alert, overcurrent and max. voltage protection
- Interlock logic for unit enable
- Software Tool for easy channel management
Overview
The CAEN Mod. A7460 is a 12 channel HV board, available with either positive or negative polarity, compatible with the CAEN Universal Multichannel Power Supply System (SY1527, SY2527, SY4527, SY5527). The A7460 channels share a common floating return, which allows on-detector grounding reducing the noise level; the floating return is insulated from the crate earth up to ±50 V.
|
SHV connector
Single width (5 TE wide), 12 channels for Mod. A7460DN, A7460DP |
Consult our connectors reference page for technical information.
The output voltage range is 0 ÷ 6 kV, with 10 mV of set and monitor resolution. The output channels offer dual current ranges (software selectable):
| High Power | 0 ÷ 1 mA (6 W Max) | I set resolution: 5 nA | I mon resolution: 2 nA |
| High Resolution | 0 ÷ 100 μA | I set resolution: 5 nA | I mon resolution: 200 pA |
Independently programmable for each channel:
| Output voltage | 0 ÷ 6 kV | step: 10 mV |
| Current limit (Iset) | 0 ÷ 1 mA | step: 5 nA |
| V Ramp up/down | 1 ÷ 500 V/sec | step: 1 V/sec |
| TRIP parameter | 0 ÷ 999.9 s; 1000 s = Infinite | step: 0.1 s |
Safety features allows the module to perform as a current generator and includes:
| Channels | can be enabled or disabled through the Global Interlock logic. |
| Overvoltage and Undervoltage warning | when the output voltage differs from the programmed value. |
| Overcurrent detection | when a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator. |
| Hardware VMAX and IMAX | maximum output voltage and maximum current value can be fixed, via front panel potentiometer, at the same common value for all the board channels. IMAX and VMAX values can be read out via software. |
Technical Specifications
- No. of Channels
12 (Common Floating Return)
- Output Voltage
0÷6 kV
- Polarity
Positive / Negative depending on purchased version
- Max. Output Current
1 mA / 100 µA (dual range)
- Voltage Set Resolution
10 mV
- Voltage Monitor Resolution
10 mV
- Current Set Resolution
5 nA
- Current Monitor Resolution
2 nA (high range) / 200 pA (low range)
- VMAX hardware
0÷6 kV common for all the board channels
- VMAX hardware accuracy
< ± 1% of FSR
- VMAX software
0÷6 kV settable for each channel
- VMAX software resolution
1 V
- IMAX hardware
0÷1 mA common for all the board channels
- IMAX hardware accuracy
< ± 1% of FSR
- Ramp Up/Down
1÷500 Volt/sec, 1 Volt/sec step settable for each channel
- Voltage Ripple
20 ÷ 1000 Hz:
< 15 mVpp (Typ)
< 20 mVpp (Max)1 ÷ 20000 kHz:
< 5 mVpp (Typ)
< 10 mVpp (Max)
- Voltage Monitor vs. Output Voltage Accuracy
±0.01% of reading ± 0.03% of Max Output Voltage
- Voltage Set vs. Output Voltage Accuracy
±0.01% of setting ± 0.03% of Max Output Voltage
- Current Monitor vs. Output Current Accuracy
± 0.02% ± 1 µA (high range)
± 0.02% ± 500 nA (low range)
- Current Set vs. Output Current Accuracy
± 0.02% ± 1 µA (high range)
± 0.02% ± 500 nA (low range)
- Consumption @ full power
120 W max
- Maximum output power
6 W per channel (software safety limit)
Compare
Compare with High Voltage Power Supply.
Loading...
Accessories
- HV Cables
- High Voltage Cable Assemblies
Ordering Options
| Code | Description |
|---|---|
| WA7460DNXAA1 | A7460DN - SYx527 H.V. channels -6kV 1mA - SHV Conn. common floating (12 ch) RoHS |
| WA7460DPXAA1 | A7460DP - SYx527 H.V. channels +6kV 1mA - SHV Conn common floating (12 ch) RoHS |