You searched for DT14 - CAEN - Tools for Discovery https://www.caen.it/ Mon, 16 Feb 2026 13:42:00 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.1 DT1419ET https://www.caen.it/products/dt1419et/ Wed, 04 Oct 2017 16:19:27 +0000 http://www.caen.it/products/dt1419et/ The CAEN Mod. DT1419ET provides 4 independent High Voltage channels in a Desktop package (110/220V AC Powered). Each channel can provide a ±500V max voltage and a 200 µA max current. The output polarity is independently selectable for each channel.
Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷50 V/s in 1 V/s steps. The module features 5 nA Iset/Imon resolution. Zoom (x 10) for Imon increases resolution to 500 pA.

SHV connector

Radiall R317580 HV coaxial connector for Mod.DT1419ET

Consult our connectors reference page for technical information.

Module control can take place either locally thanks to a 2.8" Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported.

Safety features allows the module to perform as a current generator and includes:

Channels
 can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX
 Programmable VMAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

L'articolo DT1419ET proviene da CAEN - Tools for Discovery.

]]> The CAEN Mod. DT1419ET provides 4 independent High Voltage channels in a Desktop package (110/220V AC Powered). Each channel can provide a ±500V max voltage and a 200 µA max current. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷50 V/s in 1 V/s steps. The module features 5 nA Iset/Imon resolution. Zoom (x 10) for Imon increases resolution to 500 pA.
SHV connector Radiall R317580 HV coaxial connector for Mod.DT1419ET
Consult our connectors reference page for technical information. Module control can take place either locally thanks to a 2.8" Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported. Safety features allows the module to perform as a current generator and includes:
Channels can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX Programmable VMAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

L'articolo DT1419ET proviene da CAEN - Tools for Discovery.

]]> DT1470ET https://www.caen.it/products/dt1470et/ Wed, 04 Oct 2017 16:19:27 +0000 http://www.caen.it/products/dt1470et/ The CAEN Mod. DT1470ET provides 4 independent High Voltage channels in a desktop package (110/220V AC Powered). Each channel can provide a ±8 kV max voltage, a 3 mA max current and a 9 W max power (8 W max power when output voltage is larger than ±3 kV). The output polarity is independently selectable for each channel.
Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 50 nA Iset/Imon resolution. Zoom (x 10) for Imon increases resolution to 5nA.

SHV connector

Radiall R317580 HV coaxial connector for DT1470ET

Consult our connectors reference page for technical information.

Module control can take place either locally thanks to a 2.8" Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported.

Safety features allows the module to perform as a current generator and includes:

Channels
 can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX
 Programmable VMAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

L'articolo DT1470ET proviene da CAEN - Tools for Discovery.

]]> The CAEN Mod. DT1470ET provides 4 independent High Voltage channels in a desktop package (110/220V AC Powered). Each channel can provide a ±8 kV max voltage, a 3 mA max current and a 9 W max power (8 W max power when output voltage is larger than ±3 kV). The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 50 nA Iset/Imon resolution. Zoom (x 10) for Imon increases resolution to 5nA.
SHV connector Radiall R317580 HV coaxial connector for DT1470ET
Consult our connectors reference page for technical information. Module control can take place either locally thanks to a 2.8" Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported. Safety features allows the module to perform as a current generator and includes:
Channels can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX Programmable VMAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

L'articolo DT1470ET proviene da CAEN - Tools for Discovery.

]]> DT1471ET https://www.caen.it/products/dt1471et/ Wed, 04 Oct 2017 16:19:28 +0000 http://www.caen.it/products/dt1471et/ The CAEN Mod. DT1471ET provides 4 independent High Voltage channels in a Desktop package (110/220V AC Powered). Each channel can provide a ±5.5 kV max voltage and a 300 µA max current. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 5nA Iset/Imon resolution. Zoom (x 10) for Imon increases resolution to 500 pA.

SHV connector

Radiall R317580 HV coaxial connector for DT1471ET

Consult our connectors reference page for technical information.

Module control can take place either locally thanks to a 2.8" Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported.

Safety features allows the module to perform as a current generator and includes:

Channels
 can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX
 Programmable VMAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

L'articolo DT1471ET proviene da CAEN - Tools for Discovery.

]]> The CAEN Mod. DT1471ET provides 4 independent High Voltage channels in a Desktop package (110/220V AC Powered). Each channel can provide a ±5.5 kV max voltage and a 300 µA max current. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 5nA Iset/Imon resolution. Zoom (x 10) for Imon increases resolution to 500 pA.
SHV connector Radiall R317580 HV coaxial connector for DT1471ET
Consult our connectors reference page for technical information. Module control can take place either locally thanks to a 2.8" Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported. Safety features allows the module to perform as a current generator and includes:
Channels can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX Programmable VMAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

L'articolo DT1471ET proviene da CAEN - Tools for Discovery.

]]> DT1471HET https://www.caen.it/products/dt1471het/ Wed, 04 Oct 2017 16:19:28 +0000 http://www.caen.it/products/dt1471het/ The Mod. DT1471HET provides 4 independent High Voltage channels in a Desktop package (110/220V AC Powered). Each channel can provide a ±5.5 kV max voltage and a 20µA max current. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 1 nA Iset/Imon resolution. Zoom for Imon increases resolution to 50 pA.
Module control can take place either locally thanks to a 2.8" Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet.

SHV connector

Radiall R317580 HV coaxial connector for DT1471HET

Consult our connectors reference page for technical information.

A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported.

Safety features allows the module to perform as a current generator and includes:

Channels
 can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX
 Programmable VMAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

L'articolo DT1471HET proviene da CAEN - Tools for Discovery.

]]> The Mod. DT1471HET provides 4 independent High Voltage channels in a Desktop package (110/220V AC Powered). Each channel can provide a ±5.5 kV max voltage and a 20µA max current. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output RAMP-UP and RAMP-DOWN rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 1 nA Iset/Imon resolution. Zoom for Imon increases resolution to 50 pA. Module control can take place either locally thanks to a 2.8" Touchscreen Graphic color LCD display with a completely redesigned user interface or remotely, via USB 2.0 or Ethernet.
SHV connector Radiall R317580 HV coaxial connector for DT1471HET
Consult our connectors reference page for technical information. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported. Safety features allows the module to perform as a current generator and includes:
Channels can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX Programmable VMAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

L'articolo DT1471HET proviene da CAEN - Tools for Discovery.

]]> EPICS IOC (PSM Power Supply Modules) https://www.caen.it/products/epics-ioc-psm-power-supply-modules/ Wed, 04 Oct 2017 16:19:32 +0000 http://www.caen.it/products/epics-ioc-psm-power-supply-modules/ EPICS (Experimental Physics and Industrial Control System) is a set of Open Source software tools, libraries and applications developed collaboratively and used worldwide to create distributed soft real-time control systems for scientific instruments such as a particle accelerators, telescopes and other large scientific experiments.
Client software (EPICS Channel Access Client), which requests access to a Process Variable, runs on the Host PC and is connected to the system via TCP/IP.

Supported Products: NDT14xx, R14xxET, DT14xxET, N14xxET, N14xx Power Supply Families
Supported Comm. Interface: Ethernet, USB

For more information about EPICS visit the Argonne National Laboratory EPICS website: http://www.aps.anl.gov/epics/

L'articolo EPICS IOC (PSM Power Supply Modules) proviene da CAEN - Tools for Discovery.

]]> EPICS (Experimental Physics and Industrial Control System) is a set of Open Source software tools, libraries and applications developed collaboratively and used worldwide to create distributed soft real-time control systems for scientific instruments such as a particle accelerators, telescopes and other large scientific experiments. Client software (EPICS Channel Access Client), which requests access to a Process Variable, runs on the Host PC and is connected to the system via TCP/IP.
Supported Products: NDT14xx, R14xxET, DT14xxET, N14xxET, N14xx Power Supply Families
Supported Comm. Interface: Ethernet, USB
For more information about EPICS visit the Argonne National Laboratory EPICS website: http://www.aps.anl.gov/epics/

L'articolo EPICS IOC (PSM Power Supply Modules) proviene da CAEN - Tools for Discovery.

]]> LabVIEW Driver (PSM – Power Supply Modules) https://www.caen.it/products/labview-driver-psm-power-supply-modules/ Wed, 04 Oct 2017 16:19:33 +0000 http://www.caen.it/products/labview-driver-psm-power-supply-modules/ LabVIEW Driver (PSM – Power Supply Modules) is a set of VIs developed to configure and monitor all the parameters of remotely controlled CAEN Power Supply Modules. Functions are divided in five primary groups: Initialize/Close, Configuration, Action/Status, Data and Utility to help the user to develop a control SW in the easiest possible way. All the VIs belonging to each of these primary groups are described in detail in the User Manual.
A Demo control SW developed using this tool can be downloaded from the website, in a package containing an executable and the source code, as an example showing the capabilities of this set of VIs.

This Driver is also available in the relative section of the National Instruments website.

Supported Operating Systems Windows (32-64 bit)
Supported Products NIM & NIM/Desktop & Desktop & Rack Mount Power Supply Modules: SMART HV, DT55xxE, N14xx, N14xxET , NDT14xx, R14xxET and DT14xxET Families,
DT55xxE family
Supported Comm. Interface: USB (N14xx / NDT14xx / N14xxET / DT14xxET / R14xxET / DT55xxE/ SMART HV), Ethernet (NDT14xx / N14xxET / DT14xxET / R14xxET/ DT55xxE/ SMART HV)

 

L'articolo LabVIEW Driver (PSM – Power Supply Modules) proviene da CAEN - Tools for Discovery.

]]> LabVIEW Driver (PSM – Power Supply Modules) is a set of VIs developed to configure and monitor all the parameters of remotely controlled CAEN Power Supply Modules. Functions are divided in five primary groups: Initialize/Close, Configuration, Action/Status, Data and Utility to help the user to develop a control SW in the easiest possible way. All the VIs belonging to each of these primary groups are described in detail in the User Manual. A Demo control SW developed using this tool can be downloaded from the website, in a package containing an executable and the source code, as an example showing the capabilities of this set of VIs. This Driver is also available in the relative section of the National Instruments website.
Supported Operating Systems Windows (32-64 bit)
Supported Products NIM & NIM/Desktop & Desktop & Rack Mount Power Supply Modules: SMART HV, DT55xxE, N14xx, N14xxET , NDT14xx, R14xxET and DT14xxET Families, DT55xxE family
Supported Comm. Interface: USB (N14xx / NDT14xx / N14xxET / DT14xxET / R14xxET / DT55xxE/ SMART HV), Ethernet (NDT14xx / N14xxET / DT14xxET / R14xxET/ DT55xxE/ SMART HV)
 

L'articolo LabVIEW Driver (PSM – Power Supply Modules) proviene da CAEN - Tools for Discovery.

]]> N1419 https://www.caen.it/products/n1419/ Wed, 04 Oct 2017 16:19:34 +0000 http://www.caen.it/products/n1419/ The CAEN Mod. N1419 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1419A and N1419B) are also available. Each channel can provide a ±500 V max voltage, a 200 µA max current. The output polarity is independently selectable for each channel.

Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors.
The HV output Ramp-up and Ramp-down rates may be selected independently for each channel in the range 1÷50 V/s in 1 V/s steps. The module features 5 nA Iset/Imon resolution. Features include Imon Zoom, increasing resolution to 500 pA.

SHV connector

NIM single width, 4 channels for Mod. N1419, N1419B (1 Ch), N1419A (2 Ch)

Consult our connectors reference page for technical information.

Power supply control can be performed either locally, assisted by a Graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of CAEN NIM8301.

A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported.

Safety features allows the module to perform as a current generator and includes:

Channels
 can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 1V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX
 Programmable VMAX protection limit.
Safety Board Interlock Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

Module control can take place either locally, assisted by a Graphic colour display, or remotely, via USB (1) or RS485 (1). It is also controllable via TCP/IP (2) by the Smart Fan Unit of CAEN NIM 8301 crate:

Special versions available:

  • 2 channels version (N1419A)
  • 1 channel version (N1419B)
  • 2U NIM module with 220 V/110 Vac plug for desktop operation, equipped with 2.8" Touchscreen, Ethernet and USB interface (NDT1419)
  • 2U NIM module equipped with 2.8" Touchscreen, Ethernet and USB interface (N1419ET)

Available Options:

  • A1480 DC Input Power Equalizer.

N14xx modules are provided with a USB VCP interface and can be programmed via PC by connecting the PC USB port with the N14xx USB B-type port; the featured controller (FT232BM chip) requires a driver available on this page or at www.ftdichip.com

L'articolo N1419 proviene da CAEN - Tools for Discovery.

]]> The CAEN Mod. N1419 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1419A and N1419B) are also available. Each channel can provide a ±500 V max voltage, a 200 µA max current. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output Ramp-up and Ramp-down rates may be selected independently for each channel in the range 1÷50 V/s in 1 V/s steps. The module features 5 nA Iset/Imon resolution. Features include Imon Zoom, increasing resolution to 500 pA.
SHV connector NIM single width, 4 channels for Mod. N1419, N1419B (1 Ch), N1419A (2 Ch)
Consult our connectors reference page for technical information. Power supply control can be performed either locally, assisted by a Graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of CAEN NIM8301. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported. Safety features allows the module to perform as a current generator and includes:
Channels can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 1V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX Programmable VMAX protection limit.
Safety Board Interlock Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.
Module control can take place either locally, assisted by a Graphic colour display, or remotely, via USB (1) or RS485 (1). It is also controllable via TCP/IP (2) by the Smart Fan Unit of CAEN NIM 8301 crate: Special versions available:
  • 2 channels version (N1419A)
  • 1 channel version (N1419B)
  • 2U NIM module with 220 V/110 Vac plug for desktop operation, equipped with 2.8" Touchscreen, Ethernet and USB interface (NDT1419)
  • 2U NIM module equipped with 2.8" Touchscreen, Ethernet and USB interface (N1419ET)
Available Options:
  • A1480 DC Input Power Equalizer.
N14xx modules are provided with a USB VCP interface and can be programmed via PC by connecting the PC USB port with the N14xx USB B-type port; the featured controller (FT232BM chip) requires a driver available on this page or at www.ftdichip.com

L'articolo N1419 proviene da CAEN - Tools for Discovery.

]]> N1470 https://www.caen.it/products/n1470/ Wed, 04 Oct 2017 16:19:34 +0000 http://www.caen.it/products/n1470/ N1470_allThe CAEN Mod. N1470 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1470A and N1470B) are also available. Each channel can provide a ±8kV max voltage, a 3 mA max current and a 9 W max power (8 W max power when output voltage is larger than ±3 kV). The output polarity is independently selectable for each channel.

SHV connector

NIM single width, 4 channels for Mod. N1470, N1470B (1 Ch), N1470A, N1470AL, N1470AR (2 Ch)

Consult our connectors reference page for technical information.

Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors.
The HV output Ramp-up and Ramp-down rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 50nA Iset/Imon resolution. Features include Imon Zoom, increasing resolution to 5 nA.

Power supply control can be performed either locally, assisted by a Graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of CAEN NIM8301.

A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported.

Safety features allows the module to perform as a current generator and includes:

Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection when a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
VMAX
 programmable VMAX protection limit.
Safety Board Interlock Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

Module control can take place either locally, assisted by a Graphic colour display, or remotely, via USB (1) or RS485 (1). It is also controllable via TCP/IP (2) by the Smart Fan Unit of CAEN NIM8301 crate:

Special versions available:

  • 2 channels version (N1470A)
  • 1 channel version (N1470B)
  • 2 channels Low Cost version only locally controllable (N1470AL)
  • 2 channels Low Cost version only remotely controllable (N1470AR)
  • 4 channels, 2U NIM module with 220/110 Vac plug for desktop operation equipped with 2.8" Touchscreen, Ethernet and USB interface (NDT1470)
  • 4 channels, 2U NIM module equipped with 2.8" Touchscreen, Ethernet and USB interface (N1470ET)

Available Options:

  • A1480 DC Input Power Equalizer.

N14xx modules are provided with a USB VCP interface and can be programmed via PC by connecting the PC USB port with the N14xx USB B-type port; the featured controller (FT232BM chip) requires a driver available on this page or at www.ftdichip.com

L'articolo N1470 proviene da CAEN - Tools for Discovery.

]]> The CAEN Mod. N1470 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1470A and N1470B) are also available. Each channel can provide a ±8kV max voltage, a 3 mA max current and a 9 W max power (8 W max power when output voltage is larger than ±3 kV). The output polarity is independently selectable for each channel.
SHV connector NIM single width, 4 channels for Mod. N1470, N1470B (1 Ch), N1470A, N1470AL, N1470AR (2 Ch)
Consult our connectors reference page for technical information. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output Ramp-up and Ramp-down rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 50nA Iset/Imon resolution. Features include Imon Zoom, increasing resolution to 5 nA. Power supply control can be performed either locally, assisted by a Graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of CAEN NIM8301. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported. Safety features allows the module to perform as a current generator and includes:
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection when a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
VMAX programmable VMAX protection limit.
Safety Board Interlock Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.
Module control can take place either locally, assisted by a Graphic colour display, or remotely, via USB (1) or RS485 (1). It is also controllable via TCP/IP (2) by the Smart Fan Unit of CAEN NIM8301 crate: Special versions available:
  • 2 channels version (N1470A)
  • 1 channel version (N1470B)
  • 2 channels Low Cost version only locally controllable (N1470AL)
  • 2 channels Low Cost version only remotely controllable (N1470AR)
  • 4 channels, 2U NIM module with 220/110 Vac plug for desktop operation equipped with 2.8" Touchscreen, Ethernet and USB interface (NDT1470)
  • 4 channels, 2U NIM module equipped with 2.8" Touchscreen, Ethernet and USB interface (N1470ET)
Available Options:
  • A1480 DC Input Power Equalizer.
N14xx modules are provided with a USB VCP interface and can be programmed via PC by connecting the PC USB port with the N14xx USB B-type port; the featured controller (FT232BM chip) requires a driver available on this page or at www.ftdichip.com

L'articolo N1470 proviene da CAEN - Tools for Discovery.

]]> N1471 https://www.caen.it/products/n1471/ Wed, 04 Oct 2017 16:19:35 +0000 http://www.caen.it/products/n1471/ The CAEN Mod. N1471 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1471A and N1471B) are also available. Each channel can provide a ±5.5kV / 300 µA output. The output polarity is independently selectable for each channel.

Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors.
The HV output Ramp-up and Ramp-down rates may be selected independently for each channel in the range 1В500 V/s in 1 V/s steps. The module features 5nA Iset/Imon resolution. A Zoom option (x 10) is available for Imon, increasing resolution to 500pA.

SHV connector

NIM single width, 4 channels for Mod. N1471 (2 Ch for N1471A, 1 Ch for N1471B)

Consult our connectors reference page for technical information.

Power supply control can be performed either locally, assisted by a Graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of CAEN NIM8301. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported.

Safety features allows the module to perform as a current generator and includes:

Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection when a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
VMAX
 programmable VMAX protection limit.
Safety Board Interlock Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

Module control can take place either locally, assisted by a Graphic colour display, or remotely, via USB (1) or RS485 (1). It is also controllable via TCP/IP (2) by the Smart Fan Unit of CAEN NIM 8301 crate:

Special versions available:

  • 2 channels version (N1471A)
  • 1 channel version (N1471B)
  • 4 channels, 2U NIM module with 220/110 Vac plug for desktop operation, equipped with 2.8" Touchscreen, Ethernet and USB interface (NDT1471)
  • 4 channels, 2U NIM module equipped with 2.8" Touchscreen, Ethernet and USB interface (N1471ET)
  • High-resolution models: 20µA max output, Iset/Imon: 1 nA, optional Imon-Zoom: 50 pA (N1471H, NDT1471H and N1471HET)

Available Options:

  • A1480 DC Input Power Equalizer.
  • x 10 Imon Zoom, increasing Imon resolution to 500 pA.

N14xx modules are provided with a USB VCP interface and can be programmed via PC by connecting the PC USB port with the N14xx USB B-type port; the featured controller (FT232BM chip) requires a driver available on this page or at www.ftdichip.com

L'articolo N1471 proviene da CAEN - Tools for Discovery.

]]> The CAEN Mod. N1471 provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1471A and N1471B) are also available. Each channel can provide a ±5.5kV / 300 µA output. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors. The HV output Ramp-up and Ramp-down rates may be selected independently for each channel in the range 1В500 V/s in 1 V/s steps. The module features 5nA Iset/Imon resolution. A Zoom option (x 10) is available for Imon, increasing resolution to 500pA.
SHV connector NIM single width, 4 channels for Mod. N1471 (2 Ch for N1471A, 1 Ch for N1471B)
Consult our connectors reference page for technical information. Power supply control can be performed either locally, assisted by a Graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of CAEN NIM8301. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported. Safety features allows the module to perform as a current generator and includes:
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection when a channel attempts to exceed the programmed current limit, it signalled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator.
VMAX programmable VMAX protection limit.
Safety Board Interlock Common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.
Module control can take place either locally, assisted by a Graphic colour display, or remotely, via USB (1) or RS485 (1). It is also controllable via TCP/IP (2) by the Smart Fan Unit of CAEN NIM 8301 crate: Special versions available:
  • 2 channels version (N1471A)
  • 1 channel version (N1471B)
  • 4 channels, 2U NIM module with 220/110 Vac plug for desktop operation, equipped with 2.8" Touchscreen, Ethernet and USB interface (NDT1471)
  • 4 channels, 2U NIM module equipped with 2.8" Touchscreen, Ethernet and USB interface (N1471ET)
  • High-resolution models: 20µA max output, Iset/Imon: 1 nA, optional Imon-Zoom: 50 pA (N1471H, NDT1471H and N1471HET)
Available Options:
  • A1480 DC Input Power Equalizer.
  • x 10 Imon Zoom, increasing Imon resolution to 500 pA.
N14xx modules are provided with a USB VCP interface and can be programmed via PC by connecting the PC USB port with the N14xx USB B-type port; the featured controller (FT232BM chip) requires a driver available on this page or at www.ftdichip.com

L'articolo N1471 proviene da CAEN - Tools for Discovery.

]]> N1471H https://www.caen.it/products/n1471h/ Wed, 04 Oct 2017 16:19:35 +0000 http://www.caen.it/products/n1471h/ The CAEN Mod. N1471H provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1471HA and N1471HB) are also available. Each channel can provide a ±5.5kV / 20 µA output. The output polarity is independently selectable for each channel.

Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors.

SHV connector

NIM single width, 4 channels for Mod. N1471H, N1471HA (2 Ch), N1471HB (1 Ch)

Consult our connectors reference page for technical information.

The HV output Ramp-up and Ramp-down rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 1nA Iset/Imon resolution. Zoom for Imon increases resolution to 50 pA. Power supply control can be performed either locally, assisted by a Graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of CAEN NIM8301.

A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported.

Safety features allows the module to perform as a current generator and includes:

Channels
 can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX
 programmable MAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.

Module control can take place either locally, assisted by a Graphic colour display, or remotely, via USB (1) or RS485 (1). It is also controllable via TCP/IP (2) by the Smart Fan Unit of CAEN NIM 8301 crate:

Special versions available:

  • 2 channels version  (N1471HA)
  • 1 channel version (N1471HB)
  • 2U NIM module with 220/110 Vac plug for desktop operation equipped with 2.8" Touchscreen, Ethernet and USB interface (NDT1471H)
  • 2U NIM module equipped with 2.8" Touchscreen, Ethernet and USB interface (N1471HET)

Available Options:

  • A1480 DC Input Power Equalizer.

N14xx modules are provided with a USB VCP interface and can be programmed via PC by connecting the PC USB port with the N14xx USB B-type port; the featured controller (FT232BM chip) requires a driver available on this page or at www.ftdichip.com

L'articolo N1471H proviene da CAEN - Tools for Discovery.

]]> The CAEN Mod. N1471H provides 4 independent High Voltage channels in a single width NIM mechanics. Two and one channel versions (N1471HA and N1471HB) are also available. Each channel can provide a ±5.5kV / 20 µA output. The output polarity is independently selectable for each channel. Channels have common floating return (common return insulated from the crate ground); HV outputs are delivered through SHV connectors.
SHV connector NIM single width, 4 channels for Mod. N1471H, N1471HA (2 Ch), N1471HB (1 Ch)
Consult our connectors reference page for technical information. The HV output Ramp-up and Ramp-down rates may be selected independently for each channel in the range 1÷500 V/s in 1 V/s steps. The module features 1nA Iset/Imon resolution. Zoom for Imon increases resolution to 50 pA. Power supply control can be performed either locally, assisted by a Graphic color display or remotely, via USB, RS232 or RS485, the latter allowing to build a daisy chain network of modules N14XX. It is also controllable via TCP/IP by the Smart Fan Unit of CAEN NIM8301. A complete set of free software Tools is available to control this unit: GECO2020 with user friendly GUI and CAEN HV Wrapper library for custom SW development. EPICS and LabVIEW also supported. Safety features allows the module to perform as a current generator and includes:
Channels can be enabled or disabled through the Global Interlock logic.
Overvoltage and Undervoltage warning when the output voltage differs from the programmed value by more than 2% of set value (minimum 10V).
Overcurrent detection if a channel tries to draw a current larger than its programmed limit, it enters TRIP status, keeping the maximum allowed value for a programmable time (TRIP), before being switched off.
Hardware VMAX programmable MAX protection limit.
Safety Board Interlock common Interlock logic for channels enable/disable and individual inputs signal for channel Kill function.
Module control can take place either locally, assisted by a Graphic colour display, or remotely, via USB (1) or RS485 (1). It is also controllable via TCP/IP (2) by the Smart Fan Unit of CAEN NIM 8301 crate: Special versions available:
  • 2 channels version  (N1471HA)
  • 1 channel version (N1471HB)
  • 2U NIM module with 220/110 Vac plug for desktop operation equipped with 2.8" Touchscreen, Ethernet and USB interface (NDT1471H)
  • 2U NIM module equipped with 2.8" Touchscreen, Ethernet and USB interface (N1471HET)
Available Options:
  • A1480 DC Input Power Equalizer.
N14xx modules are provided with a USB VCP interface and can be programmed via PC by connecting the PC USB port with the N14xx USB B-type port; the featured controller (FT232BM chip) requires a driver available on this page or at www.ftdichip.com

L'articolo N1471H proviene da CAEN - Tools for Discovery.

]]>