Logo Caen

DT4700

Clock Generator and FAN-OUT

Features

  • 50 MHz, 62.5 MHz clock frequencies available and switch selectable
  • Can be operated as a signal or a clock fan-out from another external source (maximum frequency 300 MHz)
  • 10 differential LVDS outputs
  • USB powered or by external power supply (5÷12 V)
  • External Clk in LVDS, LVPECL
  • Compatible with A317 clock distribution cable

Overview

The CAEN Mod. DT4700 clock generator is a compact and easy to use desktop module that allows an easy synchronization of CAEN VME, NIM and desktop digitizers. It features 10 differential LVDS outputs, compatible with A317 clock distribution cable, each providing 50 or 62.5 MHz clock signal (switch selectable) required for the synchronization procedure. It also allows the possibility of working as a fan-out of a clock coming from another external source with a maximum frequency of 300 MHz. The DT4700 can also be powered through the USB port on the rear panel or, using the included power split cable, from your digitizer supply. In addition the DT4700 can also be operated as a general purpose Fan-Out.

Technical Specifications

Packaging

Desktop module; 160 W x 55 H x 170 L mm3 Weight 1.65 kg

Clock Output

10 LVDS output

Internal generator frequency

50 or 62.5 MHz clock signal (switch selectable)

External Clock Input

AC coupled (diff. LVDS, ECL, PECL, LVPECL, CML), Zdiff= 110 Ohm; single ended NIM/TTL available by A318 cable; Guaranteed Frequency Range= from 0 to 300MHz

Thermal stability

±50 ppm

Period jitter

2 ps RMS

Operating temperature

-40 ÷ +85°C

Storage temperature

-55 ÷ 125°C

Power Requirements

The DT4700 can be powered in two ways:
• by 5V@240mA via the Micro USB port
• by 5÷12V @240mA via the 12V 2.1mm power jack

External power supply

PSAC05R-L6M WWW.PHIHONG.COM; DC Output Voltage 5V; Load 0-1.0A; INPUT: AC Input Voltage Rating 100 to 240V AC; AC Input Voltage Range 90 to 264V Ac; AC Input Frequency 47 to 63Hz; Input Current 0.3A (RMS) max at 115V AC/max load; 0.15A (RMS) max at 230V AC/max load; Leakage Current 5uA max at 240V AC, 50Hz; Inrush Current <30A for 240V AC at max load (Cold start at ambient 25°C); Input Power Saving 0.075W; OUTPUT: Output Power 5W; Efficiency DOE Level VI and CoC V5 Tier2; Ripple 200mV max;
ENVIRONMENTAL: Temperature Operation 0 to +40°C; Non-operation -40 to +85°C; Humidity 90%RH Max; Emissions Complies with FCC Class B; Complies with EN55032 Class B; AS/NZS 3548; Immunity EN50082-1: EN 61000-4-2, Level 4; Air Discharge +/-15KV; Contact +/-8KV; EN 61000-4-5, Level 3,1KV; Dielectric Withstand (Hi-pot) Test; Primary to Secondary: 3000V AC 10mA, 1 minute;
FEATURES: Short-Circuit Protection: The output can be shorted permanently without damage whenever it operates within input voltage range and temperature range specified in this specification. Output current not exceeding 0.95A (RMS). Over-Voltage Protection No to exceed 7.2V DC. Over-Current Protection Not to exceed 1.2A (RMS). DC Output Connector 2.1 x 5.5 center positive standard (P model). Micro-B USB (L6M model)

Compare

Compare with Adapters.

Loading...

Accessories

A317
Cable assembly for Clock distribution 3-pin AMPMODU IV female terminations – 18 cm / 25cm
A318
Adapter for Clock signal FISCHER S101A004 male to 3-pin AMPMODU IV female – 10 cm

Ordering Options

Code Description
WDT4700XAAAA DT4700 - Clock Generator   RoHS

Contacts

Great to have you back!